Low secondary expansion of VASmann polyurethane foam eliminates the possibility of deformation of window structures during installation.
The finely porous structure of the VASmann polyurethane foam increases the heat and sound insulating characteristics of the polyamide seams.
High adhesion to most building materials, such as: concrete, brick, plaster, wood, plastic.
VASmann polyurethane foam has an increased yield of the finished product, which reduces material consumption during application.
Professional polyurethane foam "VASmann summer 70+" is specially designed for the installation of translucent structures, facade systems, window sills, door blocks made of PVC, aluminum and wood in the optimum temperature range from + 5 ° C to + 35 ° C. The finely porous structure of the product provides high heat and sound insulation, as well as high resistance to mechanical deformation. The increased volume of filling of the source material of 890 ml allows you to get an increased volume of "output" of the finished product up to 70 l from one cylinder.
Screw the polyurethane foam bottle onto the mounting gun. Shake for 30 seconds
Humidify the work site with a spray before and after work
Adjust the feed rate with the screw of the mounting gun
Fill the seams from bottom to top, approximately 3/4 of the volume of the mounting seam. Deep seams fill in layers
Clean the gun for polyurethane foam with VASmann cleaner
When using the product, the temperature of the cylinder of polyurethane foam recommended by the manufacturer should be strictly observed when using - 18 ° C - 25 ° C
Humidification of the work site before and after application will allow to achieve a better product structure and accelerate the polymerization time
The surface at the work site should be thoroughly cleaned of dirt, dust and oil stains. Do not apply on a surface covered with ice or hoarfrost
The pre-polymer in the container, when it exits the nozzle of the mounting gun, reacts with moisture in the air and on the surface of the application.
Trade production company, founded in 2007. The main activity is the production of polyurethane foam, silicon sealants and paints and varnishes, their delivery to distribution networks throughout the world.
Manufacturer of polyurethane foam VASmann equipped with the most modern and high-tech to date equipment.
Production capacity VASmann allow for the sale of the sealants and installation foam wholesale worldwide.
Modern technologies of production of silicone, acrylic and polyurethane sealants are the guarantee of high quality products.
Raw materials of the world's leading suppliers of chemical components are used for the production of foam and sealants.